Maple Toyota
88 Auto Vaughan Drive, Maple, ON, L6A 4A1
905 417-9100
resized svg
maintenance menu header image

 Maintenance Menu

Servicing your vehicle is essential in keeping it running for as long as possible. Now, with many people working from home and driving less, your Toyota may not be used as much as it should be, which can cause mechanical problems. At Maple Toyota, we provide quick and efficient services so that you can get back in working order faster. Our expert technicians and service staff work diligently using genuine OEM parts to ensure that your vehicle is fixed correctly the first time. Visit our online service centre to learn more about our services or to schedule a service appointment. We are conveniently located in Maple, Ontario, just a short drive away from Vaughan, Richmond Hill, Markham, and North York. Consider some of these recommended tips if you find yourself driving less than usual to avoid damaging your Toyota from lack of use.

Service #1

  • Check installation of driver's floor mat.
  • Reset Maintenance Reminder Light or system.
  • Inspect all lights and horn for proper operation.
  • Inspect wiper blades, linkage, and washers for proper operation.
  • Inspect and adjust level - engine oil, brake fluid, engine/inverter coolant, power steering fluid and washer fluid.
  • Remove & inspect engine air filter.
  • Remove & inspect cabin air filter.
  • Check and record tire tread depth. Examine tires for damage and uneven wear.
  • Remove wheels & visually inspect brake pads, callipers, rotors, brake lines and hoses.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over.
  • Record inspection results, measurements, and component condition on inspection form and/or repair order.

Service #2

  • Check installation of driver's floor mat.
  • Reset Maintenance Reminder Light or system.
  • Inspect all lights and horn for proper operation.
  • Inspect wiper blades, linkage, and washers for proper operation.
  • Visually inspect drive belts.
  • Replace engine oil & filter
  • Lubricate locks, latches, and hinges.
  • Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
  • Remove & inspect engine air filter.
  • Remove wheels & visually inspect brake pads, callipers, rotors, brake lines and hoses.
  • Check and record tire tread depth. Examine tires for damage and uneven wear.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over. 3
  • Inspect differential and transfer case vents for obstruction.
  • Record inspection results, measurements, and component condition on inspection form and/or repair order.
  • Remove & inspect cabin air filter.

Service #3

  • Check installation of driver's floor mat.
  •  Reset Maintenance Reminder Light or system.
  •  Inspect all lights and horn for proper operation.
  •  Inspect wiper blades, linkage, and washers for proper operation.
  • Visually inspect drive belts adjust tension if required.
  • Replace engine oil & filter.
  • Lubricate locks, latches, and hinges.
  • Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
  • Remove & inspect engine air filter.
  • Remove wheels & visually inspect brake pads, callipers, rotors, brake lines and hoses.
  • Remove brake callipers and/or brake drums. Inspect and measure brake rotors, drums, pads, and shoes.
  • Check and record tire tread depth. Examine tires for damage and uneven wear.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over.
  • Perform 12 Volt battery service and comprehensive electrical charging system evaluation.
  • Inspect valve clearance (audibly).
  • Check steering gear, linkage and shock absorbers for looseness, damage, or leakage.
  • Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage.
  • Inspect fuel system for leaks or damage, inspect condition of fuel tank band, fuel tank cap gasket, fuel tank vapour vent system hoses, fuel lines and connections.
  • Inspect engine oil cooler lines and automatic transmission cooler lines if equipped for leakage, looseness, or damage.
  • Inspect exhaust system for leaks, damage, or broken hangers.
  • Record inspection results, measurements, and component condition on inspection form and/or repair order.
  • Remove & inspect cabin air filter.
ajax loader2